Home > Hard Drive > My Computer Not Recognising 2nd Sata Drive After Fresh Install

My Computer Not Recognising 2nd Sata Drive After Fresh Install


Oturum aç Paylaş Daha fazla Bildir Videoyu bildirmeniz mi gerekiyor? The metal the case is built from is thicker than average so the screws I have do not reach to try and install it that way. Related Resources 2nd SATA drive detected in BIOS but NOT in Windows Disk Management 2nd SATA drive detected in BIOS but NOT in Windows Disk Management solved Bios & Device Manager angry in OHIO Reply Nepe says: March 8, 2009 at 5:25 am I installed my original HD in the second bay as a slave and was able to access my files. check over here

In addition I had to purchase a PCI serial ATA host controller card with a cable to connect the new HD. I have a standard EIDE drive as my OS drive, then added a larger HDD for storage. Like backing up all the 2nd drive to a secondary location, perfrome a 2nd installation who include a format of the 2nd drive etc etc you get the idea... Most SATA Rev 2.0 drives have a jumper that you can use to force them to use the SATA Rev 1.0 protocol to get around such issues. 1 /2 2 Next

2nd Hard Drive Not Showing Up In Disk Management

If the software doesn't find the hdd, then either there is a lose cable or the drive is toast. Change any necessary jumpers (see "Setting Jumpers" above) so that both drives as well as a CD drive are recognized. Does the new drive have ANYTHING on it you want to preserve, or is it just empty? I plugged it into my computer I checked my BIOS it was there, I went onto my computer and It was split into 2 different drives (It was previously used), So

Badinfos 120.778 görüntüleme 13:13 How to recover data from a hard drive (stuck heads: buzzing, clicking, etc) - Süre: 10:28. Several functions may not work. I'm now up to 1TB for more films!! Hard Drive Shows Up In Bios But Not Disk Management Aug 31, 2010 #8 dutcher TS Rookie Topic Starter actualy when i took a better look at it it didnt have an ide connection confused it with my dvd drive.

The main block representing your optical drive will not have all this stuff because you cannot define a Partition on such a device. At this point, you may want to make some quick sketches of just how everything is in there: Which direction is everything facing? I did need to explore a little after using the wizard to find I had to right click on the new driver in the manager window to start the formating process Reply Giga says: August 19, 2007 at 12:07 am thenson, the guy who told you your your computer was fried was probably a jerk and put the virus on himself.

Reply Kyle says: November 9, 2007 at 2:12 am Well I just wanted to say that i have been struggling with my sata HD for over a week now. Windows 10 Not Detecting Hard Drive What I am not sure about is if the second hard drive should automatically store overflow data from the first drive same just as if the first drive were twice as reconnected it via SATA and same story. If I disconnect the second drive the third one appears and vice versa.

  • Reply Cliff says: December 11, 2008 at 3:23 pm Dave, Thank you for taking the time and making the effort to publish these instructions.
  • Definitely, if there is no hard disk for users to select in this screen, they will fail to install or reinstall Windows.
  • I did have just a couple of questions.
  • Back to top BC AdBot (Login to Remove) BleepingComputer.com Register to remove ads #2 Legio Legio Members 11 posts OFFLINE Gender:Male Local time:05:06 PM Posted 30 July 2015 -
  • thanks guys for creating this it sure is a help for newbies out there 🙂 as Kyle said waaaaaay back, "I did'nt know that disk management exist" hehehe Reply Bill R
  • he said I don't know but you fried your set like a blackman handling chicken in a kitchen! ?!?!?
  • Any idea on what i might be doing wrong?

Windows Not Detecting Hard Drive But Bios Does

It only requires that the BIOS can recognize the HDD you are trying to test. Go to HKEY_LOCAL_MACHINE → SYSTEM → CurrentControlSet → Services → pciide, and look for "Start". 2nd Hard Drive Not Showing Up In Disk Management and when i change it from IDE to AHCI i get a blue screan wen windows is loading. 2nd Hard Drive Not Showing Up Windows 10 Should I simply add jumpers and format the second drive?

I knew the new drive was there and installed correct as I could find it in bios as well as the hardware manager. check my blog bayareajimJan 13, 2010, 12:48 PM I had problems adding a second SATA drive in my Dell Dimension 9200. All Rights Reserved. Connor Brady 76.881 görüntüleme 4:45 How to Initialize and Format a New Hard Drive in Windows 10 - Süre: 4:55. Windows 10 Not Recognizing Usb Hard Drive

permalinkembedsaveparentgive gold[–]BillDino[S] 1 point2 points3 points 1 year ago(0 children)This solved it thank you! Login now. So let's re-examine.1. this content Having said that, this is a great article, A+.

Thanks Reply Tom says: December 20, 2008 at 10:19 pm Without getting involved in a conversation about whether or not myself or anyone else can understand the lingo here…I'm simply attempting Hard Drive Not Showing Up In Disk Management Windows 10 You can choose to place the disk online or assign a drive letter from here as well. We'll use Disk Management to examine.

Once it loads, you should see an "Initialize Disk" wizard pop up.

If you do, when you are finished come back here and find the remainder shown as "Unallocated Space". If there is no error message shown, we suggest trying this method at first. Easy to understand! Add Hard Drive Windows 10 help yourself before you can be helped!!!

I have three SATA drives installed just fine -- two Seagates and a Maxtor. Thanks all! Full Format takes many hours!When you are done, reboot and your newly prepared hard drive should show up in My Computer as an empty unit ready for use. have a peek at these guys My problem is that it thinks the "C" drive is the main drive & when I try to update my windows or drivers, it is not giving me the option to

Do I require any jumpers on these drives if I were to hook up 2 SCSI drives together? When all the choices are made, go ahead with the Partition operation.When that is done, come back to this new Partition and RIGHT-click again and choose to Format it. Before Installation Installing a hard drive is a medium level job. What options to you have to set the jumpers?

PaperdocFeb 2, 2010, 1:37 AM Deca, let's see if we can help. booted window's and still not there. Looks like the new os do not reconize the old table sitting on the 2nd drives (or the mbr of the drive). I bet you used the version of Seatools for Windows.

You'll likely either need to repair your existing windows installation, or format and re-install a clean version to use it with AHCI mode. Apple - Apple devices, services discussions. For a couple of reasons, I have decided to mount the drive inside my PC. What are the pro's and con's of cloning the old drive versus a Windows reinstall?

Solution 4. the PC should then reboot and start into your windows installation on your hard drive with highest priority as set my BIOS. Reply Dinis says: May 11, 2009 at 2:24 am David, Thank You for the above web site that help me install the hard disk and and on formatting the second half