Home > Hard Drive > XP Won't Recognize All Of The Internal 500gig HDD

XP Won't Recognize All Of The Internal 500gig HDD

Contents

I have 2 drives. Now exit out of disk Management and reboot so Windows can put this into into its Registry, and you should find the disk in My Computer again.Whatever you find, post back Q. What about your optical drive(s) - how is it / are they connected?3. http://swapshaker.com/hard-drive/reinstalling-xp-doesn-t-recognize-h-drive-size.html

Any suggestions would be super helpful! I just want my files, photos and music that is on that hard drive. I used an IDE to SATA converter to hook it up. The drives were visible in my raid control software and in the safely remove hardware icon in the tray, but still not in disk management. http://www.techsupportforum.com/forums/f10/xp-wont-recognize-all-of-the-internal-500gig-hdd-478460.html

Why Does My Hard Drive Not Show Full Capacity

Any tips? Now drive F has also disappeared. ConmarMar 14, 2010, 9:11 PM I found a way around this which I hope is the solution for all: You have to put any CD/DVD drives in a higher placement i.e. Please tell me there is still a way?

  • Glad you got it working.
  • Bill Morris September 23, 2013 2:55 pm Reply # Surface scanner 2.10 does not allow me to mount a drive in Windows 7-x64.
  • Since my installed Master was a Maxtor 6L040J2, I thought cloning my slave would make plug and play a breeze because the BIOS and driver information had already been installed?
  • if u do try win7 and vista disc and see if it show the hdd at the install process part How do you format through XP other than disk management which
  • I went to work one yesterday and everything was fine, I left my Windows 7 system running as I usually do.
  • just show no bootable device found.
  • BUT you did not say that your next step was to Create a new Primary Partition on that HDD unit.
  • Benjamin April 28, 2013 3:45 pm Reply # Thanks for the response.

i tried in another PC, had swapped every cable and tried in several OS..but result it same… is there anything with the harddisk logic card or its firmware?? After 30 minutes, drive comes comes there (in logic disks) in disk management area as "2048 GB Unallocated" with label as "disk0 Unknown". You are not going to be able and plug the drive in and pick it up with windows or any standard software. Cloned Hard Drive Not Right Size You make that disk and then boot from it into a mini-DOS that works entirely independent of Windows or any other OS on any hard drive.

I have a program that I was hoping could read it - HFSExplorer. I have kept this hard drive as slave in another pc and its also not showing. Then you just need to delete the PS3/PS4 specific partition and create your own, new, NTFS partition.     [[in short, the filesystem used on most consoles isn't directly accessible via Now, examine the TWO right-hand panes.

Thanks! 500gb Hard Drive Shows Only 130 Gb Of Space So I can NOT format or partition. I bet you used the version of Seatools for Windows. If you do, when you are finished come back here and find the remainder shown as "Unallocated Space".

Hard Drive Not Showing Full Capacity Windows 10

If not, that's bad news and could mean an electrical board problem with the drive. https://www.pctechbytes.com/hardware/hard-drive-does-not-show-up-in-bios/ The drive may have failed. Why Does My Hard Drive Not Show Full Capacity The next step in this case is to flash the BIOS. Hard Drive Not Showing Full Capacity Windows 7 I've tried using different cables (including power) and it spins up every time I turn the computer on.

So I downloaded a bios from DELL for this machine. The HDD spins (that means power is clearly working), but the BIOS just doesn't pick it up. not sure where to go.. I tried connecting the drive to another working pc as secondary, the working pc would not boot to the desktop, when i removed the secondary drive, the pc will boot to Hard Drive Capacity Restore

DISKPART> list disk Disk ### Status Size Free Dyn Gpt ----- --------- ----- ----- -- -- Disk 0 Online 931 GB 0 B Disk 1 Online 1863 GB 1024 KB Disk The hard drive is not showing up in “My Computer” or in Windows Explorer (not to be confused with internet explorer). I recommend a few different options:  You can download our Windows Surface Scanner which is free and run it to see if the drive has any bad sectors. Thank You in advance Achim Fahad March 19, 2013 4:28 pm Reply # Hi i have a Toshiba 1TB external drive that Windows 8 won't see (neither from disk management, nor

Go to the Seagate website and download the different version called Seatools for DOS. Flash Drive Not Showing Full Capacity Sign in here. Any ideas?

man today was one of those days....

Maxblast is just a partitioning and formatting utility supplied from the manufacturer. Drive F: still appears on my Computer and I can now access Shared Files between both computers which I couldn't do after installing MaxBlast5. aberchonbies instructions led me to the solution. Hard Disk Space Showing Less Than Actual Red x in email boxes The server timed out while waiting...

The hard drive on my Fujitsu-Siemens (windows xp) computer has started acting up. I re-installed it twice still nothing. IT WORKED SO GOOD THINK YOU skeettasMar 29, 2010, 8:35 AM So I got my new SSD drive. When we tried Recover It All Demo, the external hdd appeared as unknown of 2048gb.

Hope this helps Helpful +26 Report xpcman 16778Posts Wednesday October 8, 2008Registration date ContributorStatus January 10, 2017 Last seen Dec 30, 2008 at 01:31 PM I would first uninstall the Seagate Edited March 31, 2015 by GoldenShaka 0 Share this post Link to post Share on other sites StrickenBiged 2,291 "Woah? What size Partitions / Volumes do you want? Full Format takes many hours!When you are done, reboot and your newly prepared hard drive should show up in My Computer as an empty unit ready for use.

March 20, 2012 Kelly Blaine Hello Dave…my situation is a bit different than you have analyze. I turned LAN off on bios and re-run and just came up this time operating system not found the bios doesn't find the HD could this be the cable causing this Thanks in advance. Vivek David Mohyla February 7, 2013 3:06 pm Reply # Hi, Well your drive should appear in Disk Management much sooner then 30 minutes.

I tried new cables and different connections on the motherboard with same results. Can I get any data from it? It just cannot be used for booting, which you do not plan to do.2. "Usable by Windows", etc. - well, not quite yet. Take it to your local electronics shop and they'll give you a replacement (Radio Shack, Best Buy, etc….).

I am trying to reload the system with the the recovery disks I ordered from HP for this specific PC. I rebooted, Checked in the BIOS and it was there made sure it was enabled as well. All Sata3. Windows update says that the installed drivers for it are current.

My next is to see if i can get two Seagate drives to work. Until this driver is installed, Windows cannot access the RAID array. Helpful +7 Report ahparsy Aug 15, 2009 at 04:05 PM Hi Guys, I'd just like to let you know my fix for this problem. It takes less than a minute and is completely free!

Disk 0 is the drive not showing up in my computer. If that is the case, search the web for way to fix that. Proffitt Forum moderator / October 12, 2008 12:31 AM PDT In reply to: Just checking 1: Purchased SATA internal drive because I thought it would work being that the internal drive