Home > Windows Xp > What Files Does XP Need To Start?

What Files Does XP Need To Start?


This feature will allow you to undo any changes that caused problems in the CurrentControlSet registry key, which defines hardware and driver settings. Most of these (but not all) are covered by using the msconfig program mentioned in another answer. Here's Help. Read through the agreement and press F8 to confirm that you agree with the terms.

Tip: Press the Page Down key to advance through the licensing agreement faster. http://swapshaker.com/windows-xp/xp-start-up-help.html

Hardware such as Memory is tested as well as all other hardware on the system being verified. Just work through the sections in turn until you find something relevant to your problem. 1. To use the Last Known Good Configuration feature, first restart the computer by pressing [Ctrl][Alt][Delete]. See How to Retrieve the Administrator Password in Windows XP for more information.

6 Proceed to Windows XP Safe Mode Windows XP Safe Mode - Step 6 of 7. http://www.tomshardware.com/forum/241638-45-three-files-boot-windows

Windows Xp Bootable Files Download

One thing to remember, if a hard drive has not been formatted or written over by reinstalling, the data is accessible. If your Windows system is working sufficiently well, you can just follow the section on What to Back Up. 2. Click OK. repair.txt Boot the computer using the XP CD.

  1. What do the spear and watermelon jokes in "Airplane!" mean?
  2. Type: BootCfg /Rebuild which will get rid of any damaged boot.ini, search the disk for systems and make a new one.
  3. To prevent loss of data and/or program settings, perform the following before the Repair Install.
  4. Manually delete the Undo_guimode.txt file from the Windows\System32 folder before you perform any of the actions that are listed in the "Symptoms" section of this article.
  5. I have found if the Repair option is not available, you have a few paths I have listed below to try before XP requires a Clean install.
  6. Note - DO NOT press to choose the option To repair a Windows XP installation using the Recovery Console, press R Accept the License Agreement.
  7. Why is there no `nand` instruction in modern CPUs?

It will not change any of your own files or documents. network administrator tools Network Configuration Management Network inventory software Network Mapping Network monitoring / management Network Traffic Monitoring Patch Management Remote control software SharePoint Tools Software distribution and metering Storage and If you do proceed to install a fresh copy of Windows rather than repairing an existing one, you will lose access to all the applications you previously had installed (although your As long as you are doing a repair installation from a Windows XP SP2 CD, this step is probably not necessary.

On the other hand, if you're installing from an older

Ntoskrnl.exe starts Winlogon.exe which starts Lsass.exe (Local Security Administration), this is the program that displays the Welcome screen and allows a user to log on with their credentials (user name and Windows Xp Safe Mode Privacy Policy | Cookies | Ad Choice | Terms of Use | Mobile User Agreement A ZDNet site | Visit other CBS Interactive sites: Select SiteCBS CaresCBS FilmsCBS RadioCBS.comCBS InteractiveCBSNews.comCBSSports.comChowhoundClickerCNETCollege NetworkGameSpotLast.fmMaxPrepsMetacritic.comMoneywatchmySimonRadio.comSearch.comShopper.comShowtimeTech On the Confirm Restore Point Selection screen, click Next. The Workgroup or Computer Domain window will appear next with two options for you to choose from - No, this computer is not on a network, or is on a network without a domain... or Yes,

In that case, you'll need to disable the option for automatically restarting on system failure. In the C:\Windows\System32\cmd.exe dialog box, type: del /a /f c:\windows\system32\undo_guimode.txt. This should fix any boot.ini errors causing setup not to see the XP OS install. 5. This might even result in a damaged windows reappearing; but gives another chance of getting at the repair" Try the link below if the repair option is not available.

Windows Xp Safe Mode

Once this occurs, the partition boot sector takes over and begins loading Windows. Give me the name of the song How to make all nodes same size in TikZ? Windows Xp Bootable Files Download Once the initial preparation is complete, you'll see the Windows XP Setup screen (shown earlier in Figure A). Ntldr Is Missing Windows Xp Safe Mode If you choose Safe Mode on the Advanced Options Menu, Windows will attempt to start up in a special mode where only its most basic components are loaded.

Please enter a valid email address. weblink Registration with Microsoft is optional, but if you'd like to do that now, choose Yes, I'd like to register with Microsoft now, click Next -> and follow the instructions to register.

Otherwise, choose No, not Copy needed files (Ntldr, Ntdetect.com, and the boot.ini. Then, follow along with the wizard to select a restore point and begin the restoration procedure. #4: Use Recovery Console When a Windows XP boot problem is severe, you'll need to Windows 10

I looked in Start up and in Services - I cannot find the program. In other words, if it fails to revive your Windows XP on the first attempt, the backup copy is also corrupt. #3: Use System Restore Another tool that might be helpful To quit Setup without installing Windows XP, press F3. navigate here You should now see the Windows Advanced Options Menu screen.

This blog post is available in PDF format as a TechRepublic Download. Of course, you must first boot the system with the Windows XP CD and access the Recovery Console as described in #4. No user intervention is necessary.

13 Wait for Restart and Windows XP Boot Windows XP Repair Install - Step 13 of 19.

After completing [if Windows is still accessible] the steps listed to prevent data loss in warning #1 and you did not remedy the no boot situation, you can use an OEM

A Repair Installation will remove any service packs later than the ones included in the installation CD. TechRepublic Search GO CXO Cloud Big Data Security Innovation More Software Data Centers Networking Startups Tech & Work All Topics Sections: Photos Videos All Writers Newsletters Forums Resource Library Tech Pro Let’s look at the boot process. After the necessary files and drivers are loaded, the Windows XP Professional Setup screen will appear.

Press Enter to setup Windows XP now.

Note: Even though the second option is to

Here's How Article How to Properly Reinstall a Software Program in Windows Article How to Find the Administrator Password in Windows XP Article Are You Seeing a Code 43 Error? The master boot record contains the partition table for the disk as well as a small program called the master boot code, which is responsible for locating the active, or bootable, See How Do I Start Windows in Safe Mode? http://swapshaker.com/windows-xp/xp-can-t-start.html Ntoskrnl.exe and Hal.dll must be located in the %SystemRoot%\System32 folder.

You may find that some minor problems can be cured immediately by just doing a normal Windows Restart from within Safe Mode. It displays the folder containing the operating system's files and prompts you to choose the operating system you want to log on to. After the Repair install is completed, enable the XP firewall or install third party firewall software or router before connecting to the internet. Subscribed!

If you wish to make changes, click on the Customize... repair.txt XP Repair Install in PDF XPrepairinstall Warning! #1 Should you do a repair install and is it the best choice? Make sure not to disable services which are critical to the system though, otherwise your system will become unstable. The below procedure applies only if you can still boot into Windows.

Keep in mind that after you perform an in-place upgrade or repair installation, you must reinstall all updates to Windows. Once the bootable device is found, the MBR (Master Boot Record) is loaded into memory The MBR locates the active partition and loads the boot sector into memory. The Windows Setup screen will appear and a number of files and drivers necessary for the setup process will load.

Toward the beginning of this process, a message will appear that Last Known Good Configuration The Last Known Good Configuration option on the Windows Advanced Options Menu starts your computer using the configuration it stored at the last successful closedown.

To use the Bootcfg tool, from the Recovery Console command prompt, type Bootcfg /parameter Where /parameter is one of these required parameters: /Add—Scans the disk for all Windows installations and allows If you have multiple installations, use the arrow keys on your keyboard to select the installation that you are wanting to reinstall.

Since we want to repair the selected Windows XP You might want to look at the Java applet in the Windows control panel for additional control options. –boot13 Aug 29 '10 at 1:24 Thanks. You should also install up-to-date antivirus software before connecting to the network. 8.

You can use the In place upgrade option to change a Product Key in the event you entered a key that was already activated. Keep in mind that you get only one shot with the Last Known Good Configuration feature. Previously, he has worked as Documentation Specialist in the software industry, a Technical Support Specialist in educational industry, and a Technical Journalist in the computer publishing industry. Windows XP will now begin installing.

Reapply all the Windows updates or service packs applied since the initial Windows XP installation. The In Place Upgrade also produces the same result as the Repair Install. Connecting to the network (even for a few seconds) without having reinstalled Windows service packs will immediately expose you to attack. Also check these folders under other user's accounts if more than one person logs onto your PC.

You should also locate the Windows XP product key, a 25-digit alphanumeric code unique