Home > Windows Xp > XP SP2 Startup Failure - Black Screen

XP SP2 Startup Failure - Black Screen

Contents

We eliminate each major component 1X1 until we find the problem, and right now we have not conclusively tested the memory and hard disk drive (HDD). in that folder, remove the entries values. I know, I was like "no way", but seriously after the reboot following the SP3 upgrade my video popped right up at the last-saved hi res setting, go figure. i'm having similar problems. http://swapshaker.com/windows-xp/slow-startup-on-win-xp.html

Report Michael- Nov 2, 2008 at 11:26 AM Hi Just stumbled across this thread in desparation as had problems after install of TV card. That leaves the operating system. If it's a licensed copy, call Microsoft's activation hotline and they'll be able to get the WGA issue straightened out pretty quickly. Flag Permalink This was helpful (0) Collapse - Thanks by gaiuslove / May 29, 2012 10:28 PM PDT In reply to: Disk boot failure That was exactly my problem.

Windows Xp Won't Start

All Rights Reserved. I expect there is some way to securely fasten them to the HDD more effectively because as is the metal clip is not sufficient.Thankyou heaps for your post.I love u laltuna! Louis Using The REPORT Button BC Forum Rules Malware Removal Logs Forum Am I Infected Forum Before You Post About A Problem Back to top #13 ranchhand_ ranchhand_ Members 1,053 posts Once the system begins booting from the CD, simply follow the prompts that will allow the loading of the basic files needed to run Setup.

Many Many THANKS! You must also know the exact model or product name of your computer. A System Restore message may appear that lists the configuration changes that System Restore will make. Windows Xp Startup Repair Without Disk Helpful +4 Report whoever Feb 11, 2009 at 03:29 AM I have the same problem as you all here.

Select them one at a time and press the enter key to attempt a system restart. Regards, Bryon Report resistor- May 17, 2011 at 09:44 AM Before you go banging around in the BIOS try replacing the driver. Ask a question and give support. I had no idea it could be done this way.

Symptom: LED lights do not glow, display is black, computer does not start If no power is available to the computer, lights on the computer do not emit light, there is Windows Xp Not Booting In Safe Mode In other words, if it fails to revive your Windows XP on the first attempt, the backup copy is also corrupt. #3: Use System Restore Another tool that might be helpful Is it any problem with the RAM?please help.urgent.I have work to do urgently in my computer. Search all support All Support Software, Drivers and Updates Troubleshooting How to Product Information User Guides Cancel Example: “Laserjet P1102w driver” or “HP Pavilion 17-f002na will not turn on” Loading Results

  1. Setup will copy all the necessary files to the hard drive and then reboot the system.
  2. Memtest crashed (extremely strange) and the HDD has not yet been tested.
  3. Immediately start tapping the key until the Advanced Options Menu appears as shown below.
  4. Solution: I booted pressing F5 and choosing VGA 640x480 mode.

Windows Xp Won't Boot In Safe Mode

In that case, you'll need to disable the option for automatically restarting on system failure. this is the most informative post I could find on this topic.. Windows Xp Won't Start If you believe this post is offensive or violates the CNET Forums' Usage policies, you can report it below (this will not automatically remove the post). Windows Xp Startup Repair HP Customer Support Support Home Products Software and Drivers Forums Contact Support Search Select your Model Let HP find my products Identify now HP can identify most HP products and recommend

Replace the hard drive cable or at least unplug it and then re-plug it back in again. check my blog so detail step-by-step instructions would be great!! As far as the videocard - I don't know. Helpful +9 Report Darrian Nov 30, 2008 at 07:11 AM well I had the same problem I pushed the on/off button a few times and windows poped up, so give it Windows Xp Not Starting In Any Mode

Symptom Possible Cause When you press the power button: LED lights blink or glow, a fan spinning sound is heard, but the display remains black, and the notebook does not start. When it has completed all the tests, the message "press key to exit" will appear. In any case after doing a clean re-install of the latest nvidia drivers, plugging in my 19" and changing this setting, I was then able to plug back in my 24". this content Flag Permalink This was helpful (0) Collapse - Answer Safe Mode by James Denison / May 20, 2014 11:15 AM PDT In reply to: XP - Black screen after failing WGA

Contact HP for technical assistance, and report the number of blinks or beep tones. Windows Xp Won't Boot Black Screen Windows will then search for existing Windows installations. In addition, System Restore is configured by default to create restore points every 24 hours.

Report mirko- Mar 7, 2013 at 04:11 PM thank u man !

remember to put in the admin password if you have any otherwise press enter and continue. 2. If you own or have access to more than one notebook, verify that you are using the adapter which belongs to this computer. I have a TV connected to my video card via a HDMI dongle. Windows Xp Startup Repair Tool OR follow the steps below.

Hopefully this will fix this problem for me. goasfaras youcansee 1.108.159 görüntüleme 4:08 How to fix or troubleshoot a blank or black screen not powering up issues laptop - Süre: 12:33. On the Windows Advanced Boot Option screen, select one or more of the following options. have a peek at these guys After the blink sequence is repeated, the LEDs do not glow until the power button is pressed again.

After the logo "Microsoft Windows XP" and the loading bar moving, the screen goes black, but while I still see the black screen the windows song comes on: Windows is started Run Windows Update to update operating system and software. Would have tried a analogue VGA cable too, but couldn't find one. There are several things you can do to verify that power is available to the computer.

Reconnect the AC power adapter (but do not insert the battery), press the Power button, look for glowing lights near the caps lock and num lock keys, and listen for sounds ERROR The requested URL could not be retrieved The following error was encountered while trying to retrieve the URL: http://0.0.0.10/ Connection to 0.0.0.10 failed. If your Windows system is working sufficiently well, you can just follow the section on What to Back Up. 2. Previously, he has worked as Documentation Specialist in the software industry, a Technical Support Specialist in educational industry, and a Technical Journalist in the computer publishing industry.

Members can monitor the statuses of their requests from their account pages. XP operating system The Master Boot Record (MBR) within the Windows XP operating system may be corrupt. For more information, please see Overview of Recovering the OS or Reinstalling the Operating System. Worth a try before you start formating!Good Luck Flag Permalink This was helpful (1) Collapse - Yes, I replaced the sata cable and that resolved my problem by laltuna / August

If you don't like the stock appearance of Google Home, here are two quick and easy ways to make it truly yours. Remove the battery and boot on AC power only. If you haven't done so, back up all your work or create a hard drive image and save it in case it does crash at an inconvenient time. So if the BIOS tweak does not work for you, *maybe* a workaround is to ensure the display device is on first.

If the LEDs glow and the computer starts, the AC adapter might need to be replaced. Windows 7 or Vista or XP operating system Depending on the condition of the hard drive, the recovery utility may allow you to make a backup of all of your personal